<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="de">
	<id>https://stratum0.org/mediawiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Arne</id>
	<title>Stratum 0 - Benutzerbeiträge [de]</title>
	<link rel="self" type="application/atom+xml" href="https://stratum0.org/mediawiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=Arne"/>
	<link rel="alternate" type="text/html" href="https://stratum0.org/wiki/Spezial:Beitr%C3%A4ge/Arne"/>
	<updated>2026-05-09T19:38:13Z</updated>
	<subtitle>Benutzerbeiträge</subtitle>
	<generator>MediaWiki 1.31.2</generator>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Termine&amp;diff=35944</id>
		<title>Termine</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Termine&amp;diff=35944"/>
		<updated>2025-02-04T15:32:13Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Diese Seite dient als Datengrundlage für den Termin-Bot, der den Terminkalender auf der [[Hauptseite]] pflegt. Den Kalender gibt es auch abonnierbar als [https://stratum0.org/kalender/termine.ics iCal].&lt;br /&gt;
&lt;br /&gt;
Verstrichene Termine werden automatisch nach etwa 3 Monaten ins [[Termine/Archiv|Archiv]] verschoben. Um einen gewissen Rückblick zu ermöglichen, sollten verstrichene Termine immer nur als Kopiervorlage verwendet werden und nicht durch Bearbeiten in eine Folgetermin verwandelt werden.&lt;br /&gt;
&lt;br /&gt;
Hinweise zur Syntax:&lt;br /&gt;
* [https://gitli.stratum0.org/stratum0/calendar/#supported-date-formats im GitLab]&lt;br /&gt;
* Termine können über beliebig viele Tabellen verteilt werden. Der Termin-Bot parst nur, was er erkennt, alles andere wird ignoriert. Die Überschriften dienen als Kategorien.&lt;br /&gt;
&lt;br /&gt;
== Space-Events ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 11.11.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 23.11.2024 14:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 24.11.2024 12:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Einladung verschicken zur [[Vorstandssitzung 2024-12-16]] || 30.11.2024 19:00 – 19:01 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2024-12-16]] || 16.12.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Einladung verschicken zur [[Mitgliederversammlung 2025-01-26]] || 10.01.2025 19:00 – 19:01 ||&lt;br /&gt;
|-&lt;br /&gt;
| Kassenprüfung (Chillraum blockiert) || 12.01.2025 10:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 13.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| MV-Vorbereitungstreffen (Vorstand + Mitglieder nach Interesse) || 20.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| &amp;#039;&amp;#039;&amp;#039;[[Mitgliederversammlung 2025-01-26]]&amp;#039;&amp;#039;&amp;#039; (Hybrid: Brunsviga+Online) || 26.01.2025 14:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2025-02-03]] || 03.02.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 23.02.2025 12:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 03.03.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Buchklub]] || 26.02.2025 19:00 – 21:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2025-05-05]] || 05.05.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Kassenprüfung (Chillraum blockiert) || 20.07.2025 10:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Freifunk ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Treffen ([https://telmir.stratum0.org/ online] + im Space) || Mi, 19:00 || 17.07.2024 - 18.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 16.11.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 15.12.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Treffen ([https://telmir.stratum0.org/ online] + im Space) || Mi, 19:00 || 08.01.2025 - 31.12.2025&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 09.02.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Spacebienen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Bierbrauen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Bierbrauen]] (Küche belegt) || 18.01.2025 10:00 – 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== CoderDojo ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]]mentoren-Vorbereitungstreffen || 06.01.2025 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]] || 11.01.2025 14:00 – 17:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]] ([https://smaut.stratum0.org/cdbs/coderdojo/43/ Tickets]) || 22.02.2025 14:00 – 17:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Vorträge ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2024|Aufzeichnungen]]) || 14.11.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2024|Aufzeichnungen]]) || 14.12.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.02.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.03.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.04.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.05.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.06.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.07.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.08.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.09.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.10.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.11.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.12.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Workshops ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Digitalcourage Braunschweig ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Digitalcourage Braunschweig]], Offenes Ortsgruppentreffen ([https://bbb.digitalcourage.de/rooms/dat-te3-hrk/ online] + im Space) || Do/2, 19:00 || 18.04.2024 - 25.12.2024&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Malkränzchen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Malkränzchen]], offener Kreativabend (Frickelraum und/oder Küche) || Mo, 18:00 || 15.07.2024 - 20.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Malkränzchen]], offener Kreativabend (Frickelraum und/oder Küche) || Mo, 18:00 || 06.01.2025 - 01.12.2025&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Externes ==&lt;br /&gt;
&amp;lt;!-- THIS HEADLINE IS BEING PARSED BY THE CALENDAR BOT; PLEASE LEAVE AS-IS. --&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Hey, Alter!]], Arbeitstreffen (Torhaus Wendentor) || Do, 17:00 – 20:00 || 04.01.2024 - 19.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Hey, Alter!]], Arbeitstreffen (Torhaus Wendentor) || Do, 17:00 – 20:00 || 09.01.2025 - 23.12.2025&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== private Events ==&lt;br /&gt;
&amp;lt;!-- THIS HEADLINE IS BEING PARSED BY THE CALENDAR BOT; PLEASE LEAVE AS-IS. --&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| Grillchens (Offene) Feier (Chillraum+Küche) || 01.02.2025 16:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Hacken Open Air ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orga Kickofftreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 04.11.2024 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 10.12.2024 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Pretix befüllen || 09.01.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 14.01.2025 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Küchentreffen (im Space) || 24.01.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 17.02.2025 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Materialwarten (in Gifhorn) || 05.04.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Materialwarten (in Gifhorn) || 26.04.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| &amp;#039;&amp;#039;&amp;#039;Hacken Open Air 2025&amp;#039;&amp;#039;&amp;#039; || 01.07.2025 – 05.07.2025 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== OpenStreetMap ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== CTF-Stuff ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf0.de/ CTF0] Meetup || Di/2, 18:00 || 16.01.2024 - 17.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf0.de/ CyberTaskForce Zero (CTF0)] Meetup || Di/2, 18:00 || 14.01.2025 - 31.12.2025&lt;br /&gt;
|-&lt;br /&gt;
| [https://bambi11.enoflag.de/ Bambi #11 CTF Attack&amp;amp;Defense] || 09.11.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf.saarland/ SaarCTF 2024 Attack&amp;amp;Defense] || 30.11.2024 12:00 – 23:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [https://rabac.tf/ RabaCTF 2025 Attack&amp;amp;Defense] || 29.03.2025 12:00 – 23:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Spieleabend ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Kleindatenverein ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Kleindatenverein]], Offenes Treffen ([https://lecture.senfcall.de/nth-fl0-nie-hdb online] und im Space) || Do/2, 19:00 || 09.01.2025 - 31.12.2026&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Sonstiges ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| FeierOhneAnlass Frickeloenig || 23.11.2024 17:00 – 23:59 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Meshtastic]]-Treffen (im Frickelraum) || 04.02.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Sonstiges ==&lt;br /&gt;
&amp;lt;!-- THIS HEADLINE IS BEING PARSED BY THE CALENDAR BOT; PLEASE LEAVE AS-IS. --&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| Einweisung Drehmaschine (Space Werkstatt) || 07.02.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
[[Kategorie:Termine| ]]&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Termine&amp;diff=35940</id>
		<title>Termine</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Termine&amp;diff=35940"/>
		<updated>2025-02-04T14:06:20Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Diese Seite dient als Datengrundlage für den Termin-Bot, der den Terminkalender auf der [[Hauptseite]] pflegt. Den Kalender gibt es auch abonnierbar als [https://stratum0.org/kalender/termine.ics iCal].&lt;br /&gt;
&lt;br /&gt;
Verstrichene Termine werden automatisch nach etwa 3 Monaten ins [[Termine/Archiv|Archiv]] verschoben. Um einen gewissen Rückblick zu ermöglichen, sollten verstrichene Termine immer nur als Kopiervorlage verwendet werden und nicht durch Bearbeiten in eine Folgetermin verwandelt werden.&lt;br /&gt;
&lt;br /&gt;
Hinweise zur Syntax:&lt;br /&gt;
* [https://gitli.stratum0.org/stratum0/calendar/#supported-date-formats im GitLab]&lt;br /&gt;
* Termine können über beliebig viele Tabellen verteilt werden. Der Termin-Bot parst nur, was er erkennt, alles andere wird ignoriert. Die Überschriften dienen als Kategorien.&lt;br /&gt;
&lt;br /&gt;
== Space-Events ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 11.11.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 23.11.2024 14:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 24.11.2024 12:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Einladung verschicken zur [[Vorstandssitzung 2024-12-16]] || 30.11.2024 19:00 – 19:01 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2024-12-16]] || 16.12.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Einladung verschicken zur [[Mitgliederversammlung 2025-01-26]] || 10.01.2025 19:00 – 19:01 ||&lt;br /&gt;
|-&lt;br /&gt;
| Kassenprüfung (Chillraum blockiert) || 12.01.2025 10:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 13.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| MV-Vorbereitungstreffen (Vorstand + Mitglieder nach Interesse) || 20.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| &amp;#039;&amp;#039;&amp;#039;[[Mitgliederversammlung 2025-01-26]]&amp;#039;&amp;#039;&amp;#039; (Hybrid: Brunsviga+Online) || 26.01.2025 14:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2025-02-03]] || 03.02.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 23.02.2025 12:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 03.03.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Buchklub]] || 26.02.2025 19:00 – 21:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2025-05-05]] || 05.05.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Kassenprüfung (Chillraum blockiert) || 20.07.2025 10:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Freifunk ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Treffen ([https://telmir.stratum0.org/ online] + im Space) || Mi, 19:00 || 17.07.2024 - 18.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 16.11.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 15.12.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Treffen ([https://telmir.stratum0.org/ online] + im Space) || Mi, 19:00 || 08.01.2025 - 31.12.2025&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 09.02.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Spacebienen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Bierbrauen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Bierbrauen]] (Küche belegt) || 18.01.2025 10:00 – 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== CoderDojo ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]]mentoren-Vorbereitungstreffen || 06.01.2025 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]] || 11.01.2025 14:00 – 17:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]] ([https://smaut.stratum0.org/cdbs/coderdojo/43/ Tickets]) || 22.02.2025 14:00 – 17:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Vorträge ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2024|Aufzeichnungen]]) || 14.11.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2024|Aufzeichnungen]]) || 14.12.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.02.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.03.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.04.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.05.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.06.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.07.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.08.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.09.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.10.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.11.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.12.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Workshops ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Digitalcourage Braunschweig ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Digitalcourage Braunschweig]], Offenes Ortsgruppentreffen ([https://bbb.digitalcourage.de/rooms/dat-te3-hrk/ online] + im Space) || Do/2, 19:00 || 18.04.2024 - 25.12.2024&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Malkränzchen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Malkränzchen]], offener Kreativabend (Frickelraum und/oder Küche) || Mo, 18:00 || 15.07.2024 - 20.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Malkränzchen]], offener Kreativabend (Frickelraum und/oder Küche) || Mo, 18:00 || 06.01.2025 - 01.12.2025&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Externes ==&lt;br /&gt;
&amp;lt;!-- THIS HEADLINE IS BEING PARSED BY THE CALENDAR BOT; PLEASE LEAVE AS-IS. --&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Hey, Alter!]], Arbeitstreffen (Torhaus Wendentor) || Do, 17:00 – 20:00 || 04.01.2024 - 19.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Hey, Alter!]], Arbeitstreffen (Torhaus Wendentor) || Do, 17:00 – 20:00 || 09.01.2025 - 23.12.2025&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== private Events ==&lt;br /&gt;
&amp;lt;!-- THIS HEADLINE IS BEING PARSED BY THE CALENDAR BOT; PLEASE LEAVE AS-IS. --&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| Grillchens (Offene) Feier (Chillraum+Küche) || 01.02.2025 16:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Hacken Open Air ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orga Kickofftreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 04.11.2024 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 10.12.2024 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Pretix befüllen || 09.01.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 14.01.2025 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Küchentreffen (im Space) || 24.01.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 17.02.2025 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Materialwarten (in Gifhorn) || 05.04.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Materialwarten (in Gifhorn) || 26.04.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| &amp;#039;&amp;#039;&amp;#039;Hacken Open Air 2025&amp;#039;&amp;#039;&amp;#039; || 01.07.2025 – 05.07.2025 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== OpenStreetMap ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== CTF-Stuff ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf0.de/ CTF0] Meetup || Di/2, 18:00 || 16.01.2024 - 17.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf0.de/ CyberTaskForce Zero (CTF0)] Meetup || Di/2, 18:00 || 14.01.2025 - 31.12.2025&lt;br /&gt;
|-&lt;br /&gt;
| [https://bambi11.enoflag.de/ Bambi #11 CTF Attack&amp;amp;Defense] || 09.11.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf.saarland/ SaarCTF 2024 Attack&amp;amp;Defense] || 30.11.2024 12:00 – 23:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [https://rabac.tf/ RabaCTF 2025 Attack&amp;amp;Defense] || 29.03.2025 12:00 – 23:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Spieleabend ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Kleindatenverein ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Kleindatenverein]], Offenes Treffen ([https://lecture.senfcall.de/nth-fl0-nie-hdb online] und im Space) || Do/2, 19:00 || 09.01.2025 - 31.12.2026&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Sonstiges ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| FeierOhneAnlass Frickeloenig || 23.11.2024 17:00 – 23:59 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Meshtastic]]-Treffen (im Frickelraum) || 04.02.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== private Events ==&lt;br /&gt;
&amp;lt;!-- THIS HEADLINE IS BEING PARSED BY THE CALENDAR BOT; PLEASE LEAVE AS-IS. --&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| Einweisung Drehmaschine (Space Werkstatt) || 07.02.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
[[Kategorie:Termine| ]]&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Kalender&amp;diff=35939</id>
		<title>Kalender</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Kalender&amp;diff=35939"/>
		<updated>2025-02-04T13:58:10Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{#widget:Kalender|height=750px}}&lt;br /&gt;
&lt;br /&gt;
Falls du hier eigene Termine eintragen willst:&lt;br /&gt;
* trage den Termin auf der [[Termine]]-Seite ein&lt;br /&gt;
* kümmere dich darum, dass an deinem Termin eine Person den Space aufschließt (siehe [[StratumKey]])&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Termine&amp;diff=35934</id>
		<title>Termine</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Termine&amp;diff=35934"/>
		<updated>2025-02-04T13:56:59Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;Diese Seite dient als Datengrundlage für den Termin-Bot, der den Terminkalender auf der [[Hauptseite]] pflegt. Den Kalender gibt es auch abonnierbar als [https://stratum0.org/kalender/termine.ics iCal].&lt;br /&gt;
&lt;br /&gt;
Verstrichene Termine werden automatisch nach etwa 3 Monaten ins [[Termine/Archiv|Archiv]] verschoben. Um einen gewissen Rückblick zu ermöglichen, sollten verstrichene Termine immer nur als Kopiervorlage verwendet werden und nicht durch Bearbeiten in eine Folgetermin verwandelt werden.&lt;br /&gt;
&lt;br /&gt;
Hinweise zur Syntax:&lt;br /&gt;
* [https://gitli.stratum0.org/stratum0/calendar/#supported-date-formats im GitLab]&lt;br /&gt;
* Termine können über beliebig viele Tabellen verteilt werden. Der Termin-Bot parst nur, was er erkennt, alles andere wird ignoriert. Die Überschriften dienen als Kategorien.&lt;br /&gt;
&lt;br /&gt;
== Space-Events ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 11.11.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 23.11.2024 14:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 24.11.2024 12:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Einladung verschicken zur [[Vorstandssitzung 2024-12-16]] || 30.11.2024 19:00 – 19:01 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2024-12-16]] || 16.12.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Einladung verschicken zur [[Mitgliederversammlung 2025-01-26]] || 10.01.2025 19:00 – 19:01 ||&lt;br /&gt;
|-&lt;br /&gt;
| Kassenprüfung (Chillraum blockiert) || 12.01.2025 10:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 13.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| MV-Vorbereitungstreffen (Vorstand + Mitglieder nach Interesse) || 20.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| &amp;#039;&amp;#039;&amp;#039;[[Mitgliederversammlung 2025-01-26]]&amp;#039;&amp;#039;&amp;#039; (Hybrid: Brunsviga+Online) || 26.01.2025 14:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2025-02-03]] || 03.02.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Prüfung ortsveränderliche Elektrogeräte || 23.02.2025 12:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstands-Arbeitstreffen]] || 03.03.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Buchklub]] || 26.02.2025 19:00 – 21:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorstandssitzung 2025-05-05]] || 05.05.2025 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Kassenprüfung (Chillraum blockiert) || 20.07.2025 10:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Freifunk ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Treffen ([https://telmir.stratum0.org/ online] + im Space) || Mi, 19:00 || 17.07.2024 - 18.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 16.11.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 15.12.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Treffen ([https://telmir.stratum0.org/ online] + im Space) || Mi, 19:00 || 08.01.2025 - 31.12.2025&lt;br /&gt;
|-&lt;br /&gt;
| [[Freifunk]]-Basteltag (Chillraum) || 09.02.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Spacebienen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Bierbrauen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Bierbrauen]] (Küche belegt) || 18.01.2025 10:00 – 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== CoderDojo ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]]mentoren-Vorbereitungstreffen || 06.01.2025 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]] || 11.01.2025 14:00 – 17:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[CoderDojo]] ([https://smaut.stratum0.org/cdbs/coderdojo/43/ Tickets]) || 22.02.2025 14:00 – 17:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Vorträge ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2024|Aufzeichnungen]]) || 14.11.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2024|Aufzeichnungen]]) || 14.12.2024 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.01.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.02.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.03.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.04.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.05.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.06.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.07.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.08.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.09.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.10.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.11.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Vorträge]] ([[Vorträge/Vorbei#2025|Aufzeichnungen]]) || 14.12.2025 19:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Workshops ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Digitalcourage Braunschweig ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Digitalcourage Braunschweig]], Offenes Ortsgruppentreffen ([https://bbb.digitalcourage.de/rooms/dat-te3-hrk/ online] + im Space) || Do/2, 19:00 || 18.04.2024 - 25.12.2024&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Malkränzchen ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Malkränzchen]], offener Kreativabend (Frickelraum und/oder Küche) || Mo, 18:00 || 15.07.2024 - 20.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Malkränzchen]], offener Kreativabend (Frickelraum und/oder Küche) || Mo, 18:00 || 06.01.2025 - 01.12.2025&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Externes ==&lt;br /&gt;
&amp;lt;!-- THIS HEADLINE IS BEING PARSED BY THE CALENDAR BOT; PLEASE LEAVE AS-IS. --&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Hey, Alter!]], Arbeitstreffen (Torhaus Wendentor) || Do, 17:00 – 20:00 || 04.01.2024 - 19.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [[Hey, Alter!]], Arbeitstreffen (Torhaus Wendentor) || Do, 17:00 – 20:00 || 09.01.2025 - 23.12.2025&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== private Events ==&lt;br /&gt;
&amp;lt;!-- THIS HEADLINE IS BEING PARSED BY THE CALENDAR BOT; PLEASE LEAVE AS-IS. --&amp;gt;&lt;br /&gt;
&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| Grillchens (Offene) Feier (Chillraum+Küche) || 01.02.2025 16:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Hacken Open Air ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orga Kickofftreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 04.11.2024 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 10.12.2024 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Pretix befüllen || 09.01.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 14.01.2025 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Küchentreffen (im Space) || 24.01.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025 Orgatreffen (Konferenz: [https://bbb.stratum0.org/b/lar-jsl-ksr-m32 BBB]) || 17.02.2025 19:00 – 20:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Materialwarten (in Gifhorn) || 05.04.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| Hacken Open Air 2025: Materialwarten (in Gifhorn) || 26.04.2025 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| &amp;#039;&amp;#039;&amp;#039;Hacken Open Air 2025&amp;#039;&amp;#039;&amp;#039; || 01.07.2025 – 05.07.2025 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== OpenStreetMap ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== CTF-Stuff ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf0.de/ CTF0] Meetup || Di/2, 18:00 || 16.01.2024 - 17.12.2024&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf0.de/ CyberTaskForce Zero (CTF0)] Meetup || Di/2, 18:00 || 14.01.2025 - 31.12.2025&lt;br /&gt;
|-&lt;br /&gt;
| [https://bambi11.enoflag.de/ Bambi #11 CTF Attack&amp;amp;Defense] || 09.11.2024 10:00 – 18:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [https://ctf.saarland/ SaarCTF 2024 Attack&amp;amp;Defense] || 30.11.2024 12:00 – 23:00 ||&lt;br /&gt;
|-&lt;br /&gt;
| [https://rabac.tf/ RabaCTF 2025 Attack&amp;amp;Defense] || 29.03.2025 12:00 – 23:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Spieleabend ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Kleindatenverein ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Kleindatenverein]], Offenes Treffen ([https://lecture.senfcall.de/nth-fl0-nie-hdb online] und im Space) || Do/2, 19:00 || 09.01.2025 - 31.12.2026&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Sonstiges ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| FeierOhneAnlass Frickeloenig || 23.11.2024 17:00 – 23:59 ||&lt;br /&gt;
|-&lt;br /&gt;
| [[Meshtastic]]-Treffen (im Frickelraum) || 04.02.2025 19:00 – 22:00 ||&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
== Einweisung Drehmaschine ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Einweisung Drehmaschine]], (Space Werkstatt) ||Fr, 18:00 || 07.02.2025 - 07.02.2025&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;br /&gt;
&lt;br /&gt;
[[Kategorie:Termine| ]]&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Kalender&amp;diff=35933</id>
		<title>Kalender</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Kalender&amp;diff=35933"/>
		<updated>2025-02-04T13:54:26Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{#widget:Kalender|height=750px}}&lt;br /&gt;
&lt;br /&gt;
Falls du hier eigene Termine eintragen willst:&lt;br /&gt;
* trage den Termin auf der [[Termine]]-Seite ein&lt;br /&gt;
* kümmere dich darum, dass an deinem Termin eine Person den Space aufschließt (siehe [[StratumKey]])&lt;br /&gt;
&lt;br /&gt;
[[Kategorie:Termine| ]]&lt;br /&gt;
== Einweisung Drehmaschine ==&lt;br /&gt;
{| class=&amp;quot;prettytable&amp;quot;&lt;br /&gt;
! Event !! Termin !! Im Zeitraum&lt;br /&gt;
|-&lt;br /&gt;
| [[Einweisung Drehmaschine]], (Space Werkstatt) ||Fr, 18:00 || 07.02.2025 - 07.02.2025&lt;br /&gt;
|-&lt;br /&gt;
|}&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35391</id>
		<title>Resinlab</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35391"/>
		<updated>2024-12-01T17:56:06Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Hardware&lt;br /&gt;
|kontakt=[[Benutzer:larsan|larsan]], [[Benutzer:Pecca|Pecca]]&lt;br /&gt;
|beschreibung=3D-Drucker&lt;br /&gt;
|usage=Nach Einweisung durch Druckberechtigte&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Wir bauen ein Resinlab für einen Elegoo Saturn 4k plus Wash&amp;amp;Cure.&lt;br /&gt;
&lt;br /&gt;
Worum geht es? Resin-3D-Drucker: Yay. Im Space: nay.&lt;br /&gt;
Aber wir haben noch das größtenteils ungenutzte Flurklo. Raum ist klein&lt;br /&gt;
aber groß genug, hat Strom, Wasser, Belüftungsmöglichkeit und ist&lt;br /&gt;
getrennt vom Space und abschließbar. Braucht aber erstmal ein bisschen&lt;br /&gt;
mehr Renovierungszuneigung als nur einen Eimer Farbe.&lt;br /&gt;
&lt;br /&gt;
Aktueller Planungsstatus:&lt;br /&gt;
https://pad.stratum0.org/p/resinlab&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Resinlab ist jetzt voll schön &amp;lt;3&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
How to Use the Resin Printer:&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Please do not use the resin printer without prior instruction.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Prepare an .stl Model. (3D-printer page...)&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Use Chitubox: https://www.chitubox.com/en/index&amp;lt;br&amp;gt;&lt;br /&gt;
Learn how to prepare your model in Chitubox by watching this helpful video:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.youtube.com/watch?v=L-DKWm_ZUoQ&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Printer: Elegoo Saturn&amp;lt;br&amp;gt;&lt;br /&gt;
System: EL3D-3.0.1&amp;lt;br&amp;gt;&lt;br /&gt;
Firmware: V4.4.3-Z1_LCDZ/3840X2400/F2.18&amp;lt;br&amp;gt;&lt;br /&gt;
For more information, visit: https://www.elegoo.com/blogs/3d-printer-user-guide/tagged/saturn&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin type we currently have: Elegoo Standard 2.0 &amp;lt;br&amp;gt;&lt;br /&gt;
Therfore good slicer settings are -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,5.jpg|thumb|chitubox 0,50]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For prints that require maximum precission you can modify the settigs like this. In addition to that it might be helpful to use completely fresh resin, that hasn&amp;#039;t &amp;lt;br&amp;gt;&lt;br /&gt;
been in the Printer before. There might be a bottle with the writing &amp;quot;frisch&amp;quot; on it in the cupboard above the sink. Please don&amp;#039;t put anything back in it.  -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,25.jpg|thumb|chitubox 0,25]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for other resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://docs.google.com/spreadsheets/d/14R1cGB1-OxLteH79fH0lgn85j9g45iooQzL8hPbbVJk/edit#gid=669571052&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Steps in the lab:&amp;#039;&amp;#039;&amp;#039;&amp;lt;br&amp;gt;&lt;br /&gt;
The key to the lab is next to the Space door (green key fob).&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please be careful while working with resin printers. Everything will be sticky!&amp;lt;br&amp;gt;&lt;br /&gt;
Put paper on unprotected surfaces and everywhere you plan to put sticky stuff.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Resin is not good for you! Wear gloves! Change sticky gloves when necessary.&amp;lt;br&amp;gt;&lt;br /&gt;
Some people can manage to have one sticky glove and one clean one.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Turn the printer on. The switch is on the back left side.&amp;lt;br&amp;gt;&lt;br /&gt;
Insert your USB stick on the right side of the printer.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the resin is clean (nothing solid should be in there!) using a spatula. Gently move the spatula along the bottom of the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
If it is not clean, filter the resin.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the building plate is clean.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Filtering resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle it came from. Use the metal funnel and filter in the lab.&amp;lt;br&amp;gt;&lt;br /&gt;
Clean the funnel and filter after use.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Changing resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle (metal funnel and filter are somewhere close to you!), clean the tank, and put new resin in.&amp;lt;br&amp;gt;&lt;br /&gt;
We should have more tanks with other resin to make this simpler, faster, and cleaner.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Use the touch display to check your settings and start the print.&amp;lt;br&amp;gt;&lt;br /&gt;
...&lt;br /&gt;
&lt;br /&gt;
Wear new gloves!&amp;lt;br&amp;gt;&lt;br /&gt;
After the print, remove the build plate and gently take your print off the build platform using a spatula.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Avoid touching your print too much, as it is very soft at this point.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
We have an Elegoo Mercury Plus wash and cure station:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.elegoo.com/products/elegoo-mercury-plus-washing-and-curing-machine&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set the clear tank containing bioethanol (or isopropanol) on the base of the wash and cure station. Put your print into the metal cage and place both into the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
Turn on the wash and cure station, choose the circular arrows for cleaning, and set the timer to ~2 minutes (depends on the model and freshness of the isopropanol)&amp;lt;br&amp;gt;&lt;br /&gt;
Sometimes its more practical to clean your model over the sink by using the spray bottel witch contains spirit.  &amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Remove the tank and put in the little turntable.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can carefully (model and supports are soft now) try to remove supports now. Otherwise, supports can be removed later by snapping them off.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set your model on the turntable and switch the station to the little light bulb.&amp;lt;br&amp;gt;&lt;br /&gt;
Put on the cover and set the timer to ~3 minutes (depends on your model), then press start.&amp;lt;br&amp;gt;&lt;br /&gt;
Prior to curing it is recommended to let your model dry. &lt;br /&gt;
&lt;br /&gt;
The print is finished.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Now, please clean everything!&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
While you&amp;#039;re in the lab you can turn on the ventilation, especially if you have sprayed spirit around. Another way to get rid of bad smell might be to flush the toilette. &amp;lt;br&amp;gt;&lt;br /&gt;
Since the lab is rarely convertet to a bathroom, the drain sometimes dries out. When you leave the lab, please turn of the ventilation.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
It is mandatory to clean the clearing tank from time to time. Therfore you can put it in its station an activate the curing mode for a few minutes. The hardened resin seperates from the alcohol and sinks to the bottom. After that you can put the liquid back into its orignal containers using funnel and filter. (Thats why those usually empty containers should be kept) &amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
The bottom foil of the printing tank is a wearing part. After faild prints for example it can partially lose its transperancy and shoud be replaced. New foils and tools are also &amp;lt;br&amp;gt; found in the lab.&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35390</id>
		<title>Resinlab</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35390"/>
		<updated>2024-12-01T17:55:32Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Hardware&lt;br /&gt;
|kontakt=[[Benutzer:larsan|larsan]], [[Benutzer:Pecca|Pecca]]&lt;br /&gt;
|beschreibung=3D-Drucker&lt;br /&gt;
|usage=Nach Einweisung durch Druckberechtigte&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Wir bauen ein Resinlab für einen Elegoo Saturn 4k plus Wash&amp;amp;Cure.&lt;br /&gt;
&lt;br /&gt;
Worum geht es? Resin-3D-Drucker: Yay. Im Space: nay.&lt;br /&gt;
Aber wir haben noch das größtenteils ungenutzte Flurklo. Raum ist klein&lt;br /&gt;
aber groß genug, hat Strom, Wasser, Belüftungsmöglichkeit und ist&lt;br /&gt;
getrennt vom Space und abschließbar. Braucht aber erstmal ein bisschen&lt;br /&gt;
mehr Renovierungszuneigung als nur einen Eimer Farbe.&lt;br /&gt;
&lt;br /&gt;
Aktueller Planungsstatus:&lt;br /&gt;
https://pad.stratum0.org/p/resinlab&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Resinlab ist jetzt voll schön &amp;lt;3&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
How to Use the Resin Printer:&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Please do not use the resin printer without prior instruction.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Prepare an .stl Model. (3D-printer page...)&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Use Chitubox: https://www.chitubox.com/en/index&amp;lt;br&amp;gt;&lt;br /&gt;
Learn how to prepare your model in Chitubox by watching this helpful video:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.youtube.com/watch?v=L-DKWm_ZUoQ&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Printer: Elegoo Saturn&amp;lt;br&amp;gt;&lt;br /&gt;
System: EL3D-3.0.1&amp;lt;br&amp;gt;&lt;br /&gt;
Firmware: V4.4.3-Z1_LCDZ/3840X2400/F2.18&amp;lt;br&amp;gt;&lt;br /&gt;
For more information, visit: https://www.elegoo.com/blogs/3d-printer-user-guide/tagged/saturn&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin type we currently have: Elegoo Standard 2.0 &amp;lt;br&amp;gt;&lt;br /&gt;
Therfore good slicer settings are -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,5.jpg|thumb|chitubox 0,50]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For prints that require maximum precission you can modify the settigs like this. In addition to that it might be helpful to use completely fresh resin, that hasn&amp;#039;t &amp;lt;br&amp;gt;&lt;br /&gt;
been in the Printer before. There might be a bottle with the writing &amp;quot;frisch&amp;quot; on it in the cupboard above the sink. Please don&amp;#039;t put anything back in it.  -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,25.jpg|thumb|chitubox 0,25]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for other resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://docs.google.com/spreadsheets/d/14R1cGB1-OxLteH79fH0lgn85j9g45iooQzL8hPbbVJk/edit#gid=669571052&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Steps in the lab:&amp;#039;&amp;#039;&amp;#039;&amp;lt;br&amp;gt;&lt;br /&gt;
The key to the lab is next to the Space door (green key fob).&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please be careful while working with resin printers. Everything will be sticky!&amp;lt;br&amp;gt;&lt;br /&gt;
Put paper on unprotected surfaces and everywhere you plan to put sticky stuff.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Resin is not good for you! Wear gloves! Change sticky gloves when necessary.&amp;lt;br&amp;gt;&lt;br /&gt;
Some people can manage to have one sticky glove and one clean one.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Turn the printer on. The switch is on the back left side.&amp;lt;br&amp;gt;&lt;br /&gt;
Insert your USB stick on the right side of the printer.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the resin is clean (nothing solid should be in there!) using a spatula. Gently move the spatula along the bottom of the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
If it is not clean, filter the resin.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the building plate is clean.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Filtering resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle it came from. Use the metal funnel and filter in the lab.&amp;lt;br&amp;gt;&lt;br /&gt;
Clean the funnel and filter after use.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Changing resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle (metal funnel and filter are somewhere close to you!), clean the tank, and put new resin in.&amp;lt;br&amp;gt;&lt;br /&gt;
We should have more tanks with other resin to make this simpler, faster, and cleaner.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Use the touch display to check your settings and start the print.&amp;lt;br&amp;gt;&lt;br /&gt;
...&lt;br /&gt;
&lt;br /&gt;
Wear new gloves!&amp;lt;br&amp;gt;&lt;br /&gt;
After the print, remove the build plate and gently take your print off the build platform using a spatula.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Avoid touching your print too much, as it is very soft at this point.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
We have an Elegoo Mercury Plus wash and cure station:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.elegoo.com/products/elegoo-mercury-plus-washing-and-curing-machine&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set the clear tank containing bioethanol (or isopropanol) on the base of the wash and cure station. Put your print into the metal cage and place both into the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
Turn on the wash and cure station, choose the circular arrows for cleaning, and set the timer to ~2 minutes (depends on the model and freshness of the isopropanol)&amp;lt;br&amp;gt;&lt;br /&gt;
Sometimes its more practical to clean your model over the sink by using the spray bottel witch contains spirit.  &amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Remove the tank and put in the little turntable.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can carefully (model and supports are soft now) try to remove supports now. Otherwise, supports can be removed later by snapping them off.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set your model on the turntable and switch the station to the little light bulb.&amp;lt;br&amp;gt;&lt;br /&gt;
Put on the cover and set the timer to ~3 minutes (depends on your model), then press start.&amp;lt;br&amp;gt;&lt;br /&gt;
Prior to curing it is recommended to let your model dry. &lt;br /&gt;
&lt;br /&gt;
The print is finished.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Now, please clean everything!&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
While you&amp;#039;re in the lab you can turn on the ventilation, especially if you have sprayed spirit around. Another way to get rid of bad smell might be to flush the toilette. &amp;lt;br&amp;gt;&lt;br /&gt;
Since the lab is rarely convertet to a bathroom, the drain sometimes dries out. When you leave the lab, please turn of the ventilation.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
It is mandatory to clean the clearing tank from time to time. Therfore you can put it in its station an activate the curing mode for a few minutes. The hardened resin seperates from the alcohol and sinks to the bottom. After that you can put the liquid back into its orignal containers using funnel and filter. (Thats why those usually empty containers should be kept) &amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The bottom foil of the printing tank is a wearing part. After faild prints for example it can partially lose its transperancy and shoud be replaced. New foils and tools are also &amp;lt;br&amp;gt; found in the lab.&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35389</id>
		<title>Resinlab</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35389"/>
		<updated>2024-12-01T17:53:46Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Hardware&lt;br /&gt;
|kontakt=[[Benutzer:larsan|larsan]], [[Benutzer:Pecca|Pecca]]&lt;br /&gt;
|beschreibung=3D-Drucker&lt;br /&gt;
|usage=Nach Einweisung durch Druckberechtigte&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Wir bauen ein Resinlab für einen Elegoo Saturn 4k plus Wash&amp;amp;Cure.&lt;br /&gt;
&lt;br /&gt;
Worum geht es? Resin-3D-Drucker: Yay. Im Space: nay.&lt;br /&gt;
Aber wir haben noch das größtenteils ungenutzte Flurklo. Raum ist klein&lt;br /&gt;
aber groß genug, hat Strom, Wasser, Belüftungsmöglichkeit und ist&lt;br /&gt;
getrennt vom Space und abschließbar. Braucht aber erstmal ein bisschen&lt;br /&gt;
mehr Renovierungszuneigung als nur einen Eimer Farbe.&lt;br /&gt;
&lt;br /&gt;
Aktueller Planungsstatus:&lt;br /&gt;
https://pad.stratum0.org/p/resinlab&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Resinlab ist jetzt voll schön &amp;lt;3&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
How to Use the Resin Printer:&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Please do not use the resin printer without prior instruction.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Prepare an .stl Model. (3D-printer page...)&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Use Chitubox: https://www.chitubox.com/en/index&amp;lt;br&amp;gt;&lt;br /&gt;
Learn how to prepare your model in Chitubox by watching this helpful video:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.youtube.com/watch?v=L-DKWm_ZUoQ&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Printer: Elegoo Saturn&amp;lt;br&amp;gt;&lt;br /&gt;
System: EL3D-3.0.1&amp;lt;br&amp;gt;&lt;br /&gt;
Firmware: V4.4.3-Z1_LCDZ/3840X2400/F2.18&amp;lt;br&amp;gt;&lt;br /&gt;
For more information, visit: https://www.elegoo.com/blogs/3d-printer-user-guide/tagged/saturn&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin type we currently have: Elegoo Standard 2.0 &amp;lt;br&amp;gt;&lt;br /&gt;
Therfore good slicer settings are -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,5.jpg|thumb|chitubox 0,50]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For prints that require maximum precission you can modify the settigs like this. In addition to that it might be helpful to use completely fresh resin, that hasn&amp;#039;t &amp;lt;br&amp;gt;&lt;br /&gt;
been in the Printer before. There might be a bottle with the writing &amp;quot;frisch&amp;quot; on it in the cupboard above the sink. Please don&amp;#039;t put anything back in it.  -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,25.jpg|thumb|chitubox 0,25]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for other resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://docs.google.com/spreadsheets/d/14R1cGB1-OxLteH79fH0lgn85j9g45iooQzL8hPbbVJk/edit#gid=669571052&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Steps in the lab:&amp;#039;&amp;#039;&amp;#039;&amp;lt;br&amp;gt;&lt;br /&gt;
The key to the lab is next to the Space door (green key fob).&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please be careful while working with resin printers. Everything will be sticky!&amp;lt;br&amp;gt;&lt;br /&gt;
Put paper on unprotected surfaces and everywhere you plan to put sticky stuff.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Resin is not good for you! Wear gloves! Change sticky gloves when necessary.&amp;lt;br&amp;gt;&lt;br /&gt;
Some people can manage to have one sticky glove and one clean one.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Turn the printer on. The switch is on the back left side.&amp;lt;br&amp;gt;&lt;br /&gt;
Insert your USB stick on the right side of the printer.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the resin is clean (nothing solid should be in there!) using a spatula. Gently move the spatula along the bottom of the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
If it is not clean, filter the resin.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the building plate is clean.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Filtering resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle it came from. Use the metal funnel and filter in the lab.&amp;lt;br&amp;gt;&lt;br /&gt;
Clean the funnel and filter after use.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Changing resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle (metal funnel and filter are somewhere close to you!), clean the tank, and put new resin in.&amp;lt;br&amp;gt;&lt;br /&gt;
We should have more tanks with other resin to make this simpler, faster, and cleaner.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Use the touch display to check your settings and start the print.&amp;lt;br&amp;gt;&lt;br /&gt;
...&lt;br /&gt;
&lt;br /&gt;
Wear new gloves!&amp;lt;br&amp;gt;&lt;br /&gt;
After the print, remove the build plate and gently take your print off the build platform using a spatula.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Avoid touching your print too much, as it is very soft at this point.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
We have an Elegoo Mercury Plus wash and cure station:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.elegoo.com/products/elegoo-mercury-plus-washing-and-curing-machine&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set the clear tank containing bioethanol (or isopropanol) on the base of the wash and cure station. Put your print into the metal cage and place both into the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
Turn on the wash and cure station, choose the circular arrows for cleaning, and set the timer to ~2 minutes (depends on the model and freshness of the isopropanol)&amp;lt;br&amp;gt;&lt;br /&gt;
Sometimes its more practical to clean your model over the sink by using the spray bottel witch contains spirit.  &amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Remove the tank and put in the little turntable.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can carefully (model and supports are soft now) try to remove supports now. Otherwise, supports can be removed later by snapping them off.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set your model on the turntable and switch the station to the little light bulb.&amp;lt;br&amp;gt;&lt;br /&gt;
Put on the cover and set the timer to ~3 minutes (depends on your model), then press start.&amp;lt;br&amp;gt;&lt;br /&gt;
Prior to curing it is recommended to let your model dry. &lt;br /&gt;
&lt;br /&gt;
The print is finished.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Now, please clean everything!&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
While you&amp;#039;re in the lab you can turn on the ventilation, especially if you have sprayed spirit around. Another way to get rid of bad smell might be to flush the toilette. &amp;lt;br&amp;gt;&lt;br /&gt;
Since the lab is rarely convertet to a bathroom, the drain sometimes dries out. When you leave the lab, please turn of the ventilation.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
It is mandatory to clean the clearing tank from time to time. Therfore you can put it in its station an activate the curing mode for a few minutes. The hardened resin seperates &amp;lt;br&amp;gt; from the alcohol and sinks to the bottom. After that you can put the liquid back into its orignal containers using funnel and filter. (Thats why those usually empty containers&amp;lt;br&amp;gt;&lt;br /&gt;
should be kept) &amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The bottom foil of the printing tank is a wearing part. After faild prints for example it can partially lose its transperancy and shoud be replaced. New foils and tools are also &amp;lt;br&amp;gt; found in the lab.&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35388</id>
		<title>Resinlab</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35388"/>
		<updated>2024-12-01T16:50:07Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Hardware&lt;br /&gt;
|kontakt=[[Benutzer:larsan|larsan]], [[Benutzer:Pecca|Pecca]]&lt;br /&gt;
|beschreibung=3D-Drucker&lt;br /&gt;
|usage=Nach Einweisung durch Druckberechtigte&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Wir bauen ein Resinlab für einen Elegoo Saturn 4k plus Wash&amp;amp;Cure.&lt;br /&gt;
&lt;br /&gt;
Worum geht es? Resin-3D-Drucker: Yay. Im Space: nay.&lt;br /&gt;
Aber wir haben noch das größtenteils ungenutzte Flurklo. Raum ist klein&lt;br /&gt;
aber groß genug, hat Strom, Wasser, Belüftungsmöglichkeit und ist&lt;br /&gt;
getrennt vom Space und abschließbar. Braucht aber erstmal ein bisschen&lt;br /&gt;
mehr Renovierungszuneigung als nur einen Eimer Farbe.&lt;br /&gt;
&lt;br /&gt;
Aktueller Planungsstatus:&lt;br /&gt;
https://pad.stratum0.org/p/resinlab&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Resinlab ist jetzt voll schön &amp;lt;3&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
How to Use the Resin Printer:&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Please do not use the resin printer without prior instruction.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Prepare an .stl Model. (3D-printer page...)&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Use Chitubox: https://www.chitubox.com/en/index&amp;lt;br&amp;gt;&lt;br /&gt;
Learn how to prepare your model in Chitubox by watching this helpful video:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.youtube.com/watch?v=L-DKWm_ZUoQ&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Printer: Elegoo Saturn&amp;lt;br&amp;gt;&lt;br /&gt;
System: EL3D-3.0.1&amp;lt;br&amp;gt;&lt;br /&gt;
Firmware: V4.4.3-Z1_LCDZ/3840X2400/F2.18&amp;lt;br&amp;gt;&lt;br /&gt;
For more information, visit: https://www.elegoo.com/blogs/3d-printer-user-guide/tagged/saturn&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin type we currently have: Elegoo Standard 2.0 &amp;lt;br&amp;gt;&lt;br /&gt;
Therfore good slicer settings are -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,5.jpg|thumb|chitubox 0,50]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For prints that require maximum precission you can modify the settigs like this. In addition to that it might be helpful to use completely fresh resin, that hasn&amp;#039;t &amp;lt;br&amp;gt;&lt;br /&gt;
been in the Printer before. There might be a bottle with the writing &amp;quot;frisch&amp;quot; on it in the cupboard above the sink. Please don&amp;#039;t put anything back in it.  -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,25.jpg|thumb|chitubox 0,25]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for Elegoo resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://drive.google.com/file/d/1_jnyMfNkm4sPJhKyN46ey5CO-ks4MRyR/view&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for other resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://docs.google.com/spreadsheets/d/14R1cGB1-OxLteH79fH0lgn85j9g45iooQzL8hPbbVJk/edit#gid=669571052&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Steps in the lab:&amp;#039;&amp;#039;&amp;#039;&amp;lt;br&amp;gt;&lt;br /&gt;
The key to the lab is next to the Space door (green key fob).&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please be careful while working with resin printers. Everything will be sticky!&amp;lt;br&amp;gt;&lt;br /&gt;
Put paper on unprotected surfaces and everywhere you plan to put sticky stuff.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Resin is not good for you! Wear gloves! Change sticky gloves when necessary.&amp;lt;br&amp;gt;&lt;br /&gt;
Some people can manage to have one sticky glove and one clean one.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Turn the printer on. The switch is on the back left side.&amp;lt;br&amp;gt;&lt;br /&gt;
Insert your USB stick on the right side of the printer.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the resin is clean (nothing solid should be in there!) using a spatula. Gently move the spatula along the bottom of the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
If it is not clean, filter the resin.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the building plate is clean.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Filtering resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle it came from. Use the metal funnel and filter in the lab.&amp;lt;br&amp;gt;&lt;br /&gt;
Clean the funnel and filter after use.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Changing resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle (metal funnel and filter are somewhere close to you!), clean the tank, and put new resin in.&amp;lt;br&amp;gt;&lt;br /&gt;
We should have more tanks with other resin to make this simpler, faster, and cleaner.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Use the touch display to check your settings and start the print.&amp;lt;br&amp;gt;&lt;br /&gt;
...&lt;br /&gt;
&lt;br /&gt;
Wear new gloves!&amp;lt;br&amp;gt;&lt;br /&gt;
After the print, remove the build plate and gently take your print off the build platform using a spatula.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Avoid touching your print too much, as it is very soft at this point.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
We have an Elegoo Mercury Plus wash and cure station:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.elegoo.com/products/elegoo-mercury-plus-washing-and-curing-machine&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set the clear tank containing bioethanol (or isopropanol) on the base of the wash and cure station. Put your print into the metal cage and place both into the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
Turn on the wash and cure station, choose the circular arrows for cleaning, and set the timer to ~2 minutes (depends on the model and freshness of the isopropanol), then start the cleaning process.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Remove the tank and put in the little turntable.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can carefully (model and supports are soft now) try to remove supports now. Otherwise, supports can be removed later by snapping them off.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Set your model on the turntable and switch the station to the little light bulb.&amp;lt;br&amp;gt;&lt;br /&gt;
Put on the cover and set the timer to ~3 minutes (depends on your model), then press start.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The print is finished.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Now, please clean everything!&amp;#039;&amp;#039;&amp;#039;&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35387</id>
		<title>Resinlab</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35387"/>
		<updated>2024-12-01T16:43:28Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Hardware&lt;br /&gt;
|kontakt=[[Benutzer:larsan|larsan]], [[Benutzer:Pecca|Pecca]]&lt;br /&gt;
|beschreibung=3D-Drucker&lt;br /&gt;
|usage=Nach Einweisung durch Druckberechtigte&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Wir bauen ein Resinlab für einen Elegoo Saturn 4k plus Wash&amp;amp;Cure.&lt;br /&gt;
&lt;br /&gt;
Worum geht es? Resin-3D-Drucker: Yay. Im Space: nay.&lt;br /&gt;
Aber wir haben noch das größtenteils ungenutzte Flurklo. Raum ist klein&lt;br /&gt;
aber groß genug, hat Strom, Wasser, Belüftungsmöglichkeit und ist&lt;br /&gt;
getrennt vom Space und abschließbar. Braucht aber erstmal ein bisschen&lt;br /&gt;
mehr Renovierungszuneigung als nur einen Eimer Farbe.&lt;br /&gt;
&lt;br /&gt;
Aktueller Planungsstatus:&lt;br /&gt;
https://pad.stratum0.org/p/resinlab&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Resinlab ist jetzt voll schön &amp;lt;3&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
How to Use the Resin Printer:&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Please do not use the resin printer without prior instruction.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Prepare an .stl Model. (3D-printer page...)&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Use Chitubox: https://www.chitubox.com/en/index&amp;lt;br&amp;gt;&lt;br /&gt;
Learn how to prepare your model in Chitubox by watching this helpful video:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.youtube.com/watch?v=L-DKWm_ZUoQ&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Printer: Elegoo Saturn&amp;lt;br&amp;gt;&lt;br /&gt;
System: EL3D-3.0.1&amp;lt;br&amp;gt;&lt;br /&gt;
Firmware: V4.4.3-Z1_LCDZ/3840X2400/F2.18&amp;lt;br&amp;gt;&lt;br /&gt;
For more information, visit: https://www.elegoo.com/blogs/3d-printer-user-guide/tagged/saturn&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin type we currently have: Elegoo Standard 2.0 &amp;lt;br&amp;gt;&lt;br /&gt;
Therfore good slicer settings are -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,5.jpg|thumb|chitubox 0,50]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For prints that require maximum precission you can modify the settigs like this. In addition to that it might be helpful to use completely fresh resin -&amp;gt;&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,25.jpg|thumb|chitubox 0,25]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for Elegoo resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://drive.google.com/file/d/1_jnyMfNkm4sPJhKyN46ey5CO-ks4MRyR/view&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for other resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://docs.google.com/spreadsheets/d/14R1cGB1-OxLteH79fH0lgn85j9g45iooQzL8hPbbVJk/edit#gid=669571052&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Steps in the lab:&amp;#039;&amp;#039;&amp;#039;&amp;lt;br&amp;gt;&lt;br /&gt;
The key to the lab is next to the Space door (green key fob).&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please be careful while working with resin printers. Everything will be sticky!&amp;lt;br&amp;gt;&lt;br /&gt;
Put paper on unprotected surfaces and everywhere you plan to put sticky stuff.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Resin is not good for you! Wear gloves! Change sticky gloves when necessary.&amp;lt;br&amp;gt;&lt;br /&gt;
Some people can manage to have one sticky glove and one clean one.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Turn the printer on. The switch is on the back left side.&amp;lt;br&amp;gt;&lt;br /&gt;
Insert your USB stick on the right side of the printer.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the resin is clean (nothing solid should be in there!) using a spatula. Gently move the spatula along the bottom of the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
If it is not clean, filter the resin.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the building plate is clean.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Filtering resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle it came from. Use the metal funnel and filter in the lab.&amp;lt;br&amp;gt;&lt;br /&gt;
Clean the funnel and filter after use.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Changing resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle (metal funnel and filter are somewhere close to you!), clean the tank, and put new resin in.&amp;lt;br&amp;gt;&lt;br /&gt;
We should have more tanks with other resin to make this simpler, faster, and cleaner.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Use the touch display to check your settings and start the print.&amp;lt;br&amp;gt;&lt;br /&gt;
...&lt;br /&gt;
&lt;br /&gt;
Wear new gloves!&amp;lt;br&amp;gt;&lt;br /&gt;
After the print, remove the build plate and gently take your print off the build platform using a spatula.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Avoid touching your print too much, as it is very soft at this point.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
We have an Elegoo Mercury Plus wash and cure station:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.elegoo.com/products/elegoo-mercury-plus-washing-and-curing-machine&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set the clear tank containing bioethanol (or isopropanol) on the base of the wash and cure station. Put your print into the metal cage and place both into the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
Turn on the wash and cure station, choose the circular arrows for cleaning, and set the timer to ~2 minutes (depends on the model and freshness of the isopropanol), then start the cleaning process.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Remove the tank and put in the little turntable.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can carefully (model and supports are soft now) try to remove supports now. Otherwise, supports can be removed later by snapping them off.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Set your model on the turntable and switch the station to the little light bulb.&amp;lt;br&amp;gt;&lt;br /&gt;
Put on the cover and set the timer to ~3 minutes (depends on your model), then press start.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The print is finished.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Now, please clean everything!&amp;#039;&amp;#039;&amp;#039;&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35386</id>
		<title>Resinlab</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35386"/>
		<updated>2024-12-01T16:41:56Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Hardware&lt;br /&gt;
|kontakt=[[Benutzer:larsan|larsan]], [[Benutzer:Pecca|Pecca]]&lt;br /&gt;
|beschreibung=3D-Drucker&lt;br /&gt;
|usage=Nach Einweisung durch Druckberechtigte&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Wir bauen ein Resinlab für einen Elegoo Saturn 4k plus Wash&amp;amp;Cure.&lt;br /&gt;
&lt;br /&gt;
Worum geht es? Resin-3D-Drucker: Yay. Im Space: nay.&lt;br /&gt;
Aber wir haben noch das größtenteils ungenutzte Flurklo. Raum ist klein&lt;br /&gt;
aber groß genug, hat Strom, Wasser, Belüftungsmöglichkeit und ist&lt;br /&gt;
getrennt vom Space und abschließbar. Braucht aber erstmal ein bisschen&lt;br /&gt;
mehr Renovierungszuneigung als nur einen Eimer Farbe.&lt;br /&gt;
&lt;br /&gt;
Aktueller Planungsstatus:&lt;br /&gt;
https://pad.stratum0.org/p/resinlab&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Resinlab ist jetzt voll schön &amp;lt;3&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
How to Use the Resin Printer:&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Please do not use the resin printer without prior instruction.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Prepare an .stl Model. (3D-printer page...)&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Use Chitubox: https://www.chitubox.com/en/index&amp;lt;br&amp;gt;&lt;br /&gt;
Learn how to prepare your model in Chitubox by watching this helpful video:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.youtube.com/watch?v=L-DKWm_ZUoQ&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Printer: Elegoo Saturn&amp;lt;br&amp;gt;&lt;br /&gt;
System: EL3D-3.0.1&amp;lt;br&amp;gt;&lt;br /&gt;
Firmware: V4.4.3-Z1_LCDZ/3840X2400/F2.18&amp;lt;br&amp;gt;&lt;br /&gt;
For more information, visit: https://www.elegoo.com/blogs/3d-printer-user-guide/tagged/saturn&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin type we currently have: Elegoo Standard 2.0 &amp;lt;br&amp;gt;&lt;br /&gt;
Therfore good slicer settings are:&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,5.jpg|thumb|chitubox 0,50]]&lt;br /&gt;
&lt;br /&gt;
For prints that require maximum precission you can modify the settigs like this. In addition to that it might be helpful to use completely fresh resin&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,25.jpg|thumb|chitubox 0,25]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for Elegoo resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://drive.google.com/file/d/1_jnyMfNkm4sPJhKyN46ey5CO-ks4MRyR/view&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for other resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://docs.google.com/spreadsheets/d/14R1cGB1-OxLteH79fH0lgn85j9g45iooQzL8hPbbVJk/edit#gid=669571052&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Steps in the lab:&amp;#039;&amp;#039;&amp;#039;&amp;lt;br&amp;gt;&lt;br /&gt;
The key to the lab is next to the Space door (green key fob).&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please be careful while working with resin printers. Everything will be sticky!&amp;lt;br&amp;gt;&lt;br /&gt;
Put paper on unprotected surfaces and everywhere you plan to put sticky stuff.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Resin is not good for you! Wear gloves! Change sticky gloves when necessary.&amp;lt;br&amp;gt;&lt;br /&gt;
Some people can manage to have one sticky glove and one clean one.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Turn the printer on. The switch is on the back left side.&amp;lt;br&amp;gt;&lt;br /&gt;
Insert your USB stick on the right side of the printer.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the resin is clean (nothing solid should be in there!) using a spatula. Gently move the spatula along the bottom of the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
If it is not clean, filter the resin.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the building plate is clean.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Filtering resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle it came from. Use the metal funnel and filter in the lab.&amp;lt;br&amp;gt;&lt;br /&gt;
Clean the funnel and filter after use.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Changing resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle (metal funnel and filter are somewhere close to you!), clean the tank, and put new resin in.&amp;lt;br&amp;gt;&lt;br /&gt;
We should have more tanks with other resin to make this simpler, faster, and cleaner.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Use the touch display to check your settings and start the print.&amp;lt;br&amp;gt;&lt;br /&gt;
...&lt;br /&gt;
&lt;br /&gt;
Wear new gloves!&amp;lt;br&amp;gt;&lt;br /&gt;
After the print, remove the build plate and gently take your print off the build platform using a spatula.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Avoid touching your print too much, as it is very soft at this point.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
We have an Elegoo Mercury Plus wash and cure station:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.elegoo.com/products/elegoo-mercury-plus-washing-and-curing-machine&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set the clear tank containing bioethanol (or isopropanol) on the base of the wash and cure station. Put your print into the metal cage and place both into the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
Turn on the wash and cure station, choose the circular arrows for cleaning, and set the timer to ~2 minutes (depends on the model and freshness of the isopropanol), then start the cleaning process.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Remove the tank and put in the little turntable.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can carefully (model and supports are soft now) try to remove supports now. Otherwise, supports can be removed later by snapping them off.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Set your model on the turntable and switch the station to the little light bulb.&amp;lt;br&amp;gt;&lt;br /&gt;
Put on the cover and set the timer to ~3 minutes (depends on your model), then press start.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The print is finished.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Now, please clean everything!&amp;#039;&amp;#039;&amp;#039;&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35385</id>
		<title>Resinlab</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Resinlab&amp;diff=35385"/>
		<updated>2024-12-01T16:40:38Z</updated>

		<summary type="html">&lt;p&gt;Arne: &lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{Hardware&lt;br /&gt;
|kontakt=[[Benutzer:larsan|larsan]], [[Benutzer:Pecca|Pecca]]&lt;br /&gt;
|beschreibung=3D-Drucker&lt;br /&gt;
|usage=Nach Einweisung durch Druckberechtigte&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
Wir bauen ein Resinlab für einen Elegoo Saturn 4k plus Wash&amp;amp;Cure.&lt;br /&gt;
&lt;br /&gt;
Worum geht es? Resin-3D-Drucker: Yay. Im Space: nay.&lt;br /&gt;
Aber wir haben noch das größtenteils ungenutzte Flurklo. Raum ist klein&lt;br /&gt;
aber groß genug, hat Strom, Wasser, Belüftungsmöglichkeit und ist&lt;br /&gt;
getrennt vom Space und abschließbar. Braucht aber erstmal ein bisschen&lt;br /&gt;
mehr Renovierungszuneigung als nur einen Eimer Farbe.&lt;br /&gt;
&lt;br /&gt;
Aktueller Planungsstatus:&lt;br /&gt;
https://pad.stratum0.org/p/resinlab&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Resinlab ist jetzt voll schön &amp;lt;3&amp;#039;&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
How to Use the Resin Printer:&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Please do not use the resin printer without prior instruction.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Prepare an .stl Model. (3D-printer page...)&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Use Chitubox: https://www.chitubox.com/en/index&amp;lt;br&amp;gt;&lt;br /&gt;
Learn how to prepare your model in Chitubox by watching this helpful video:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.youtube.com/watch?v=L-DKWm_ZUoQ&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Printer: Elegoo Saturn&amp;lt;br&amp;gt;&lt;br /&gt;
System: EL3D-3.0.1&amp;lt;br&amp;gt;&lt;br /&gt;
Firmware: V4.4.3-Z1_LCDZ/3840X2400/F2.18&amp;lt;br&amp;gt;&lt;br /&gt;
For more information, visit: https://www.elegoo.com/blogs/3d-printer-user-guide/tagged/saturn&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin type we currently have: Elegoo Standard 2.0 &amp;lt;br&amp;gt;&lt;br /&gt;
Therfore good slicer settings are:&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,5.jpg|thumb|chitubox 0,25]]&lt;br /&gt;
&lt;br /&gt;
For prints that require maximum precission you can modify the settigs like this. In addition to that it might be helpful to use completely fresh resin&lt;br /&gt;
&lt;br /&gt;
[[Datei:0,25.jpg|thumb|chitubox 0,25]]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for Elegoo resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://drive.google.com/file/d/1_jnyMfNkm4sPJhKyN46ey5CO-ks4MRyR/view&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Resin settings for other resins:&amp;lt;br&amp;gt;&lt;br /&gt;
https://docs.google.com/spreadsheets/d/14R1cGB1-OxLteH79fH0lgn85j9g45iooQzL8hPbbVJk/edit#gid=669571052&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Steps in the lab:&amp;#039;&amp;#039;&amp;#039;&amp;lt;br&amp;gt;&lt;br /&gt;
The key to the lab is next to the Space door (green key fob).&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Please be careful while working with resin printers. Everything will be sticky!&amp;lt;br&amp;gt;&lt;br /&gt;
Put paper on unprotected surfaces and everywhere you plan to put sticky stuff.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Resin is not good for you! Wear gloves! Change sticky gloves when necessary.&amp;lt;br&amp;gt;&lt;br /&gt;
Some people can manage to have one sticky glove and one clean one.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Turn the printer on. The switch is on the back left side.&amp;lt;br&amp;gt;&lt;br /&gt;
Insert your USB stick on the right side of the printer.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the resin is clean (nothing solid should be in there!) using a spatula. Gently move the spatula along the bottom of the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
If it is not clean, filter the resin.&amp;lt;br&amp;gt;&lt;br /&gt;
Check if the building plate is clean.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Filtering resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle it came from. Use the metal funnel and filter in the lab.&amp;lt;br&amp;gt;&lt;br /&gt;
Clean the funnel and filter after use.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Changing resin:&amp;lt;br&amp;gt;&lt;br /&gt;
Filter the resin into the bottle (metal funnel and filter are somewhere close to you!), clean the tank, and put new resin in.&amp;lt;br&amp;gt;&lt;br /&gt;
We should have more tanks with other resin to make this simpler, faster, and cleaner.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Use the touch display to check your settings and start the print.&amp;lt;br&amp;gt;&lt;br /&gt;
...&lt;br /&gt;
&lt;br /&gt;
Wear new gloves!&amp;lt;br&amp;gt;&lt;br /&gt;
After the print, remove the build plate and gently take your print off the build platform using a spatula.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Avoid touching your print too much, as it is very soft at this point.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
We have an Elegoo Mercury Plus wash and cure station:&amp;lt;br&amp;gt;&lt;br /&gt;
https://www.elegoo.com/products/elegoo-mercury-plus-washing-and-curing-machine&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Set the clear tank containing bioethanol (or isopropanol) on the base of the wash and cure station. Put your print into the metal cage and place both into the tank.&amp;lt;br&amp;gt;&lt;br /&gt;
Turn on the wash and cure station, choose the circular arrows for cleaning, and set the timer to ~2 minutes (depends on the model and freshness of the isopropanol), then start the cleaning process.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Remove the tank and put in the little turntable.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
You can carefully (model and supports are soft now) try to remove supports now. Otherwise, supports can be removed later by snapping them off.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
Set your model on the turntable and switch the station to the little light bulb.&amp;lt;br&amp;gt;&lt;br /&gt;
Put on the cover and set the timer to ~3 minutes (depends on your model), then press start.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
The print is finished.&amp;lt;br&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;&amp;#039;Now, please clean everything!&amp;#039;&amp;#039;&amp;#039;&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Datei:0,5.jpg&amp;diff=35384</id>
		<title>Datei:0,5.jpg</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Datei:0,5.jpg&amp;diff=35384"/>
		<updated>2024-12-01T16:15:03Z</updated>

		<summary type="html">&lt;p&gt;Arne: User created page with UploadWizard&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;=={{int:filedesc}}==&lt;br /&gt;
{{Information&lt;br /&gt;
|description={{de|1=chitubox 0,25}}&lt;br /&gt;
|date=2024-12-01&lt;br /&gt;
|source={{own}}&lt;br /&gt;
|author=[[User:Arne|Arne]]&lt;br /&gt;
|permission=&lt;br /&gt;
|other versions=&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
=={{int:license-header}}==&lt;br /&gt;
{{self|cc-by-sa-4.0}}&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Datei:0,25.jpg&amp;diff=35383</id>
		<title>Datei:0,25.jpg</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Datei:0,25.jpg&amp;diff=35383"/>
		<updated>2024-12-01T16:12:49Z</updated>

		<summary type="html">&lt;p&gt;Arne: User created page with UploadWizard&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;=={{int:filedesc}}==&lt;br /&gt;
{{Information&lt;br /&gt;
|description={{de|1=chitubox 0,25}}&lt;br /&gt;
|date=2024-12-01&lt;br /&gt;
|source={{own}}&lt;br /&gt;
|author=[[User:Arne|Arne]]&lt;br /&gt;
|permission=&lt;br /&gt;
|other versions=&lt;br /&gt;
}}&lt;br /&gt;
&lt;br /&gt;
=={{int:license-header}}==&lt;br /&gt;
{{self|cc-by-sa-4.0}}&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
	<entry>
		<id>https://stratum0.org/mediawiki/index.php?title=Vortr%C3%A4ge&amp;diff=35359</id>
		<title>Vorträge</title>
		<link rel="alternate" type="text/html" href="https://stratum0.org/mediawiki/index.php?title=Vortr%C3%A4ge&amp;diff=35359"/>
		<updated>2024-11-26T09:57:39Z</updated>

		<summary type="html">&lt;p&gt;Arne: /* Talks am Samstag, 14. Dezember 2024, ab 19:00 */&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;In einem guten Hackerspace hackt nicht nur jeder für sich selbst, sondern gibt sein Wissen auch weiter. Deshalb sollen hier mögliche Vorträge gesammelt werden, die in den Fokus des Spaces passen (Technik, Kultur, Gesellschaft, und kreativer Umgang damit).&lt;br /&gt;
&lt;br /&gt;
Zur Zeit gibt es etwa monatlich, meist am 14. eines Monats, einen Sammeltermin für Lightning Talks (Richtlinie hierbei ist: Wer sich von den aktiven Vereinsentitäten zuständig fühlt, darf einen Termin ansetzen, muss den dann aber auch organisieren). Längere Vorträge dürfen aber auch gerne separat an anderen Terminen (z.B. über die [[Mailingliste]]) angekündigt werden.&lt;br /&gt;
&lt;br /&gt;
Wir sind auch für Vorträge von Externen offen. Falls du uns noch nicht kennst, noch nie bei uns warst, aber meinst, dass dein Vortrag in unseren Fokus passt (siehe oben), melde dich bei uns unter &amp;lt;tt&amp;gt;kontakt &amp;lt;at&amp;gt; stratum0.org&amp;lt;/tt&amp;gt;.&lt;br /&gt;
&lt;br /&gt;
Für Präsentationen gibt es unter [[Corporate Identity]] eine Vorlage.&lt;br /&gt;
&lt;br /&gt;
== Talks am Samstag, 14. Dezember 2024, ab 19:00 ==&lt;br /&gt;
BigBlueButton: https://bbb.stratum0.org/b/lar-6ah-sqp-zhe ([https://public.senfcall.de/s0vortraege fallback]) &amp;lt;br&amp;gt;&lt;br /&gt;
YouTube Livestream: https://www.youtube.com/watch?v=PLz6TyIj8-k&lt;br /&gt;
&lt;br /&gt;
&amp;#039;&amp;#039;Daumenregel: wenn nach 17 Uhr kein Vortrag eingetragen ist, dann findet der Termin nicht statt.&amp;#039;&amp;#039;&lt;br /&gt;
&lt;br /&gt;
&amp;lt;!-- Syntax: * {{Benutzer|DeinBenutzername}}: Dein Vortragstitel (Schätzung der Vortragsdauer) --&amp;gt;&lt;br /&gt;
* {{Benutzer|CVE}}: arti: Rewriting Tor in Rust (30 Minuten)&lt;br /&gt;
* {{Benutzer|Arne}}: Kelvingenerator mit Teelichtantrieb - Die Gewitterwolke für den Schreibtisch (30 Minuten)&lt;br /&gt;
* Du?&lt;br /&gt;
&lt;br /&gt;
== Archiv ==&lt;br /&gt;
Schon gehaltene Vorträge, Aufzeichnungen und zusätzliches Material werden unter [[/Vorbei]] gesammelt.&lt;br /&gt;
&lt;br /&gt;
== Recording ==&lt;br /&gt;
Wir versuchen, so viele Vorträge wie möglich aufzuzeichen. Das ganze ist aber natürlich opt-out.&lt;br /&gt;
&lt;br /&gt;
* Video: Aufgezeichnet wird die Videoausgabe des Vortragendenendgeräts via HDMI standardmäßig in 1080p30&lt;br /&gt;
* Kamera: Eine Speakercam gibt es derzeit noch nicht, wenn z.B. Hardware gezeigt werden soll, wird dafür eine Kamera aufgebaut und später in die Aufzeichnung geschnitten.&lt;br /&gt;
* Audio: Ein [http://www.samsontech.com/samson/products/microphones/usb-microphones/meteormic/ Samson Meteor Mic], positioniert in Speakernähe, zeichnet das gesprochene Wort auf. Fängt aber auch gut Rückfragen aus dem Raum mit auf.&lt;br /&gt;
* Lizenz: Veröffentlicht wird unter CC BY-SA 4.0&lt;br /&gt;
&lt;br /&gt;
Details zum Recording-Workflow und der Technik dahinter, dem aktuellen Stand und der Entwicklung über die Zeit finden sich unter [[/Recording-Workflow]].&lt;br /&gt;
&lt;br /&gt;
== Vorschläge ==&lt;br /&gt;
Diese Liste dient eher als Notizzettel für Leute, die sich vorstellen könnten, irgendwann mal über ein bestimmtes Thema zu reden. Wenn du einen Vortrag halten willst, darfst du dich hier (oder auch gleich oben unter dem endgültigen Termin) gerne eintragen.&lt;br /&gt;
&lt;br /&gt;
=== Lightning Talks ===&lt;br /&gt;
Definition: {{WP|Lightning Talk|l=en}}, Dauer etwa 10 Minuten (aber wir sind da liberal.)&lt;br /&gt;
* x86: Still too large: 457 bytes for a raytracer ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* x86: The new Elymas Regex engine ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Wat: x86 Edition ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Wat: ARMv7 Edition ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Theorie: Der Pi-Kalkül ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Psycho: Wie unser Denken kaputt ist, Biases und so... ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Psycho: Rhetorik, aka Gehirne von Zuhörern hacken ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Psycho: Agency, aka mach, was du willst ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Psycho: Mental Self-Defense 101 ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Misc: Task management ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Databases: Eine Datenbank mit Geo-Redundanz (7/7): Benchmarks and Tuning ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
* Einführung in die Computerstenografie ([[Benutzer:Ktrask|ktrask]])&lt;br /&gt;
* Bestimmung der Lichtgeschwindigkeit mithilfe einer Tafel Schokolade und einer Mikrowelle. [[Benutzer:Lulu|Lulu]]&lt;br /&gt;
* Random Decision Forests (Machine Learning) - ([[Benutzer:Lydia|Lydia]])&lt;br /&gt;
* Z80 Single (Bread)Board Computer (Kabelsalat ist gesund!) - ([[Benutzer:Rkbm|Rkbm]])&lt;br /&gt;
* Bienen, und dass man sie in der Stadt halten kann - [[Benutzer:Lulu|Lulu]]&lt;br /&gt;
* Bienen-Überwachungs-Staat, ein Arduino-Projekt zur Völker-Kontrolle. - [[Benutzer:Lulu|Lulu]]&lt;br /&gt;
* Das Inventarisierungssystem des Hackerspaces &amp;quot;Mainframe&amp;quot; in Oldenburg.([[Gegenstandsinfosystem]]) ([[User:Bahnpirat|Bahnpirat]])&lt;br /&gt;
* Distanz-sensitive Bloomfilter - Was ist das überhaupt? ({{Benutzer|chamaeleon}})&lt;br /&gt;
* Decentralized Social Media &amp;amp; how to tame them ([[Benutzer:Saxnot|Saxnot]])&lt;br /&gt;
* The faraway dream of General Intelligence (hard AI) ([[Benutzer:Saxnot|Saxnot]])&lt;br /&gt;
* Ackerböden in Deutschland ([[Benutzer:winniehell|winniehell]])&lt;br /&gt;
* Labor-Informations-System(e) ([[Benutzer:winniehell|winniehell]])&lt;br /&gt;
* Fit(s) mit Numpy/Scipy/Matplotlib/Pandas ([[Benutzer:winniehell|winniehell]])&lt;br /&gt;
* Spiele mit Godot und C# ([[Benutzer:winniehell|winniehell]])&lt;br /&gt;
* Wie ich zu Loriot auf Lochstreifen kam. Von Switch-Case-Gewirr und ausgenuztem Overflow.([[Benutzer:Frickelkoenig|FKF_BS]])&lt;br /&gt;
* Was ist eigentlich funktionale Sicherheit? ([[Benutzer:Frickelkoenig|FKF_BS]])&lt;br /&gt;
* 50 Herz. Eine kurze Geschichte der Netzfrequenz. ([[Benutzer:Frickelkoenig|FKF_BS]])&lt;br /&gt;
* Björn und die 112. Eine kurze Geschichte des Notrufs. ([[Benutzer:Frickelkoenig|FKF_BS]])&lt;br /&gt;
&lt;br /&gt;
=== Lange Vorträge ===&lt;br /&gt;
Alles, was signifikant über 10 Minuten Dauer hinausgeht.&lt;br /&gt;
# Elymas - my current favorite programming language ([[Benutzer:Drahflow|Drahflow]])&lt;br /&gt;
# NTP Autokey authentication - Security gone wrong ([[Benutzer:tsuro|tsuro]])&lt;br /&gt;
# Linked Data - Grundlagen ([[Benutzer:Angelo|Angelo]])&lt;br /&gt;
# Lojban ([[Benutzer:Valodim|Valodim]])&lt;br /&gt;
# Social Web of Data - Dezentrale Soziale Netzwerke mit Linked Data ([[Benutzer:Angelo|Angelo]])&lt;br /&gt;
# [[OpenTTD]] - a game for all kinds of nerds ([[Benutzer:DieLenaMaria|DieLenaMaria]], flexibel einsetzbar als Lightingtalk / Längerer Vortrag / Workshop / Spielrunde oder Kombination daraus, kann somit 10 Minuten oder deutlich länger dauern)&lt;br /&gt;
# Datenassimilierungsexperimente im Rahmen eines Projektes zur Luftqualitätsüberwachung- und vorhersage [[User:Leprovokateur|LeProvokateur]]&lt;br /&gt;
# C Programme, vom compilen bis zur Ausführung. Übersicht über glibc, ld-linux.so, gcc, shared libraries etc. (Kann ich im Sommer mal halten, [[Benutzer:tsuro|tsuro]])&lt;br /&gt;
# Unix basics (shell, Prozesse, I/O und I/O-redirection, &amp;quot;Läuft auf Unix&amp;quot; vs. &amp;quot;ist ein `richtiges&amp;#039; Unix-Programm&amp;quot;, ...) [[User:urs|urs]]&lt;br /&gt;
# Unix tty driver (cooked vs cbreak vs raw, sessions/groups/processes, job control, signals), Terminals (VT100, xterm, ...), curses [[User:urs|urs]]&lt;br /&gt;
# Unix Time Keeping [[User:urs|urs]]&lt;br /&gt;
# TCP/IP basics: vom Data-Link-Layer bis Application Layer [[User:urs|urs]]&lt;br /&gt;
# TCP/IP Teil2: NAT, Tunnel, IPv6, ... [[User:urs|urs]]&lt;br /&gt;
# Linux LVM und Device Mapper [[User:urs|urs]]&lt;br /&gt;
# &amp;quot;Informationssicherheit - Die Norm&amp;quot; DIN/ISO 27001, 27002: Was ist das und was macht man damit? [[Benutzer:Lulu|Lulu]]&lt;br /&gt;
# Javascript - Geht das auch richtig? (JavascriptChaos) [[Benutzer:marudor|marudor]]&lt;br /&gt;
# Getting Things Done - das Betriebssystem für den Kopf [[Benutzer:saxnot|saxnot]]&lt;br /&gt;
# CEPH mit nur einem Server [[Benutzer:kenakapheus|kenakapheus]]&lt;br /&gt;
# Vision: Mobilitäts-Wende durch Mobilitäts-Infrastruktur ([[Benutzer:dancingCycles|dancingCycle]])&lt;br /&gt;
# Ampeln sucks! But why not. Ein Einblick in die Auslegung von Lichtsignalanlagen ([[Benutzer:Frickelkoenig|FKF_BS]])&lt;br /&gt;
# Strom außerhalb der Reichweite von &amp;lt;s&amp;gt;Kindern&amp;lt;/s&amp;gt; Menschen aufbewahren. Was die Schutzmaßnahmen (nicht) können. ([[Benutzer:Frickelkoenig|FKF_BS]])&lt;br /&gt;
# Warum Blitze kein DC sind. Blitzschutz von Fangspitze bis Tiefenerder ([[Benutzer:Frickelkoenig|FKF_BS]])&lt;br /&gt;
&lt;br /&gt;
== Workshops ==&lt;br /&gt;
# Einführung in Krypto, sprich von Null auf Krypto  ist wahlweise nach Teilnehmern ohne/wenig/viel Mathe, etwa 200 Folien (Dauer 8h). [[Benutzer:Peelson|Peelson]]&lt;br /&gt;
## Bin interessiert! [[Benutzer:Lulu]]&lt;br /&gt;
# Tor (the second-generation onion router) was man mit Tor machen kann (Zensur umgehen, Anonymität) (Dauer 4-6h). [[Benutzer:Peelson|Peelson]]&lt;br /&gt;
&lt;br /&gt;
== Wunschliste ==&lt;br /&gt;
Eine Liste von Themen, für die sich Leute interessieren. Falls du über etwas davon Bescheid weißt, warum nicht einen Talk drüber halten? :-)&lt;br /&gt;
&lt;br /&gt;
* Consensus in Distributed Systems (Paxos, Raft, Blockchains etc) --[[Benutzer:Daniel Bohrer|Daniel Bohrer]]&lt;br /&gt;
* Deniable Encryption - gewünscht von [[Benutzer:Lulu|Lulu]]&lt;br /&gt;
* Pixel-Art Workshop - gewünscht von [[Benutzer:flooohrian|flooohrian]]&lt;br /&gt;
* Weitere Prepping-Themen - gewünscht von [[Benutzer:Lulu|Lulu]]&lt;br /&gt;
* Austausch über gelebte Opsec (Chatham House Rules, ohne Aufzeichnung) - gewünscht von [[Benutzer:J/C|J/C]]&lt;br /&gt;
* Kubernetes im Home Lab - Macht das Sinn und wie geht das? - gewünscht von [[Benutzer:J/C|J/C]]&lt;br /&gt;
* Ceph im Home Lab - Macht das Sinn und wie geht das? - gewünscht von [[Benutzer:J/C|J/C]]&lt;br /&gt;
* Einstieg in Terraform für Self-hosting use cases im Home Lab - gewünscht von [[Benutzer:J/C|J/C]]&lt;br /&gt;
&lt;br /&gt;
[[Kategorie:Community]]&lt;br /&gt;
[[Kategorie:Termine]]&lt;br /&gt;
[[Kategorie:Vorträge]]&lt;br /&gt;
[[Kategorie:Recurring]]&lt;/div&gt;</summary>
		<author><name>Arne</name></author>
		
	</entry>
</feed>