RepRap/Configs/Slic3r/printer.ini

1. generated by Slic3r 1.2.9 on Thu Jan 28 20:04:50 2016

bed_shape = 0x0,200x0,200x177,0x177 before_layer_gcode = end_gcode = M104 S0  ; turn off temperature\nM140 S0  ; Bed off\nG28 X0  ; home X axis\nG0 Y177  ; moving Bed out\nM84  ; disable motors\n extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = nozzle_diameter = 0.5 octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C octoprint_host = rapsberry:5000 pressure_advance = 0 retract_before_travel = 2 retract_layer_change = 1 retract_length = 5 retract_length_toolchange = 10 retract_lift = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 start_gcode = G28 Z0  ; home Z\nG1 Z10  ; if bed is not level, don't scratch bed when homing XY\nG28 X0 Y0  ; home X Y\nG28 Z0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 vibration_limit = 0 wipe = 0 z_offset = 0