|
|
| (12 dazwischenliegende Versionen von 5 Benutzern werden nicht angezeigt) |
| Zeile 1: |
Zeile 1: |
| − | Eine Seite um (gute) Beispielkonfigkurationen zu sammeln, am besten mit Beispieldruck (Foto)
| + | #redirect [[3D-Drucken#Slic3r-Einstellungen]] |
| − | | |
| − | Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
| |
| − | | |
| − | ===== Von larsan =====
| |
| − | Ursprünglich die erste Konfiguration für unseren Drucker auf Basis von {{Benutzer|DanielWillmann}}s Konfiguration.
| |
| − | | |
| − | Von der unten stehenden Config gibt es eine verbesserte [https://rohieb.name/stuff/stratum0/larsan-tuned.ini larsan-tuned.ini], die Rohieb gemacht hat.
| |
| − | | |
| − | <pre style="height:200px;overflow:scroll;">
| |
| − | # generated by Slic3r 0.9.8-dev on Wed Nov 28 08:03:30 2012 | |
| − | acceleration = 0
| |
| − | bed_size = 180,200
| |
| − | bed_temperature = 50
| |
| − | bottom_solid_layers = 3
| |
| − | bridge_fan_speed = 100
| |
| − | bridge_flow_ratio = 1
| |
| − | bridge_speed = 60
| |
| − | brim_width = 0
| |
| − | complete_objects =
| |
| − | cooling =
| |
| − | disable_fan_first_layers = 1
| |
| − | duplicate = 1
| |
| − | duplicate_distance = 6
| |
| − | duplicate_grid = 1,1
| |
| − | end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
| |
| − | external_perimeter_speed = 40%
| |
| − | extra_perimeters = 1
| |
| − | extruder_clearance_height = 20
| |
| − | extruder_clearance_radius = 30
| |
| − | extruder_offset = 0x0
| |
| − | extrusion_axis = E
| |
| − | extrusion_multiplier = 1
| |
| − | extrusion_width = 0
| |
| − | fan_always_on = 0
| |
| − | fan_below_layer_time = 60
| |
| − | filament_diameter = 1.75
| |
| − | fill_angle = 0
| |
| − | fill_density = 0.15
| |
| − | fill_pattern = honeycomb
| |
| − | first_layer_bed_temperature = 50
| |
| − | first_layer_extrusion_width = 0
| |
| − | first_layer_height = 0.27
| |
| − | first_layer_speed = 15%
| |
| − | first_layer_temperature = 195
| |
| − | g0 = 0
| |
| − | gap_fill_speed = 20
| |
| − | gcode_arcs = 0
| |
| − | gcode_comments = 0
| |
| − | gcode_flavor = reprap
| |
| − | infill_acceleration = 50
| |
| − | infill_every_layers = 1
| |
| − | infill_extruder = 1
| |
| − | infill_extrusion_width = 0
| |
| − | infill_speed = 60
| |
| − | layer_gcode =
| |
| − | layer_height = 0.24
| |
| − | max_fan_speed = 100
| |
| − | min_fan_speed = 35
| |
| − | min_print_speed = 5
| |
| − | min_skirt_length = 0
| |
| − | notes = larsanconfig
| |
| − | nozzle_diameter = 0.35
| |
| − | only_retract_when_crossing_perimeters =
| |
| − | output_filename_format = [input_filename_base].gcode
| |
| − | perimeter_acceleration = 25
| |
| − | perimeter_extruder = 1
| |
| − | perimeter_extrusion_width = 0
| |
| − | perimeter_speed = 50
| |
| − | perimeters = 3
| |
| − | post_process =
| |
| − | print_center = 90,100
| |
| − | randomize_start = 1
| |
| − | retract_before_travel = 5
| |
| − | retract_length = 2
| |
| − | retract_length_toolchange = 3
| |
| − | retract_lift = 0
| |
| − | retract_restart_extra = 0.01
| |
| − | retract_restart_extra_toolchange = 0
| |
| − | retract_speed = 50
| |
| − | rotate = 0
| |
| − | scale = 1
| |
| − | skirt_distance = 20
| |
| − | skirt_height = 1
| |
| − | skirts = 3
| |
| − | slowdown_below_layer_time = 50
| |
| − | small_perimeter_speed = 100%
| |
| − | solid_fill_pattern = rectilinear
| |
| − | solid_infill_below_area = 0
| |
| − | solid_infill_every_layers = 0
| |
| − | solid_infill_speed = 90%
| |
| − | start_gcode = G28 ; home all axes\nM92 E820
| |
| − | support_material =
| |
| − | support_material_angle = 45
| |
| − | support_material_extruder = 1
| |
| − | support_material_extrusion_width = 0
| |
| − | support_material_pattern = rectilinear
| |
| − | support_material_spacing = 2
| |
| − | support_material_speed = 60
| |
| − | support_material_threshold = 41
| |
| − | temperature = 185
| |
| − | threads = 2
| |
| − | top_solid_infill_speed = 70%
| |
| − | top_solid_layers = 3
| |
| − | travel_speed = 50
| |
| − | use_relative_e_distances = 0
| |
| − | vibration_limit = 0
| |
| − | z_offset = 0
| |
| − | </pre>
| |
| − | | |
| − | == Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ==
| |
| − | Der erste und letzte Layer wird "normal schnell" gedruckt, die anderen doppelt so schnell. Bei dünnen Strukturen (z.B. Mate-Tags) muss man notfalls noch ein bisschen mit der Perimeteranzahl spielen.
| |
| − | <pre style="height:200px;overflow:scroll;">
| |
| − | # generated by Slic3r 0.9.4-dev on Fri Nov 16 20:55:02 2012
| |
| − | acceleration = 0
| |
| − | bed_size = 180,200
| |
| − | bed_temperature = 60
| |
| − | bridge_fan_speed = 100
| |
| − | bridge_flow_ratio = 1
| |
| − | bridge_speed = 350
| |
| − | brim_width = 0
| |
| − | complete_objects = 0
| |
| − | cooling = 1
| |
| − | disable_fan_first_layers = 1
| |
| − | duplicate = 1
| |
| − | duplicate_distance = 6
| |
| − | duplicate_grid = 1,1
| |
| − | end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
| |
| − | external_perimeter_speed = 90%
| |
| − | extra_perimeters = 1
| |
| − | extruder_clearance_height = 20
| |
| − | extruder_clearance_radius = 20
| |
| − | extruder_offset = 0x0
| |
| − | extrusion_axis = E
| |
| − | extrusion_multiplier = 1.0
| |
| − | extrusion_width = 0
| |
| − | fan_always_on = 0
| |
| − | fan_below_layer_time = 60
| |
| − | filament_diameter = 1.75
| |
| − | fill_angle = 0
| |
| − | fill_density = 0.2
| |
| − | fill_pattern = rectilinear
| |
| − | first_layer_bed_temperature = 60
| |
| − | first_layer_extrusion_width = 0
| |
| − | first_layer_height = 100%
| |
| − | first_layer_speed = 20%
| |
| − | first_layer_temperature = 195
| |
| − | g0 = 0
| |
| − | gcode_arcs = 0
| |
| − | gcode_comments = 0
| |
| − | gcode_flavor = reprap
| |
| − | infill_acceleration = 50
| |
| − | infill_every_layers = 1
| |
| − | infill_extruder = 1
| |
| − | infill_extrusion_width = 0
| |
| − | infill_speed = 120
| |
| − | layer_gcode =
| |
| − | layer_height = 0.25
| |
| − | max_fan_speed = 100
| |
| − | min_fan_speed = 35
| |
| − | min_print_speed = 10
| |
| − | notes = Used for Mate name tag
| |
| − | nozzle_diameter = 0.35
| |
| − | only_retract_when_crossing_perimeters = 0
| |
| − | output_filename_format = [input_filename_base].gcode
| |
| − | perimeter_acceleration = 25
| |
| − | perimeter_extruder = 1
| |
| − | perimeter_extrusion_width = 0
| |
| − | perimeter_speed = 100
| |
| − | perimeters = 2
| |
| − | post_process =
| |
| − | print_center = 90,100
| |
| − | randomize_start = 1
| |
| − | retract_before_travel = 4
| |
| − | retract_length = 4
| |
| − | retract_length_toolchange = 3
| |
| − | retract_lift = 0.5
| |
| − | retract_restart_extra = 0
| |
| − | retract_restart_extra_toolchange = 0
| |
| − | retract_speed = 150
| |
| − | rotate = 0
| |
| − | scale = 1
| |
| − | skirt_distance = 10
| |
| − | skirt_height = 1
| |
| − | skirts = 2
| |
| − | slowdown_below_layer_time = 60
| |
| − | small_perimeter_speed = 80%
| |
| − | solid_fill_pattern = rectilinear
| |
| − | solid_infill_below_area = 0
| |
| − | solid_infill_every_layers = 0
| |
| − | solid_infill_speed = 100%
| |
| − | solid_layers = 3
| |
| − | start_gcode = G28 ; home all axes\nM92 E820
| |
| − | support_material = 1
| |
| − | support_material_angle = 45
| |
| − | support_material_extruder = 1
| |
| − | support_material_extrusion_width = 0
| |
| − | support_material_pattern = rectilinear
| |
| − | support_material_spacing = 3
| |
| − | support_material_threshold = 45
| |
| − | temperature = 185
| |
| − | threads = 3
| |
| − | top_solid_infill_speed = 50%
| |
| − | travel_speed = 140
| |
| − | use_relative_e_distances = 0
| |
| − | z_offset = 0.22
| |
| − | </pre>
| |
| − | | |
| − | == von Chrissi^ ==
| |
| − | * Nette Konfiguration zum Drucken von allem möglichen.
| |
| − | * First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
| |
| − | * First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
| |
| − | <pre style="height:200px;overflow:scroll;">
| |
| − | # generated by Slic3r 0.9.3 on Tue Nov 6 21:53:43 2012 | |
| − | acceleration = 0
| |
| − | bed_size = 180,200
| |
| − | bed_temperature = 60
| |
| − | bridge_fan_speed = 100
| |
| − | bridge_flow_ratio = 1.05
| |
| − | bridge_speed = 60
| |
| − | brim_width = 0
| |
| − | complete_objects =
| |
| − | cooling = 1
| |
| − | disable_fan_first_layers = 1
| |
| − | duplicate = 1
| |
| − | duplicate_distance = 6
| |
| − | duplicate_grid = 1,1
| |
| − | end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
| |
| − | external_perimeter_speed = 100%
| |
| − | extra_perimeters = 1
| |
| − | extruder_clearance_height = 20
| |
| − | extruder_clearance_radius = 30
| |
| − | extruder_offset = 0x0
| |
| − | extrusion_axis = E
| |
| − | extrusion_multiplier = 1
| |
| − | extrusion_width = 100%
| |
| − | fan_always_on = 0
| |
| − | fan_below_layer_time = 60
| |
| − | filament_diameter = 1.75
| |
| − | fill_angle = 45
| |
| − | fill_density = 0.1
| |
| − | fill_pattern = rectilinear
| |
| − | first_layer_bed_temperature = 60
| |
| − | first_layer_extrusion_width = 112%
| |
| − | first_layer_height = 95%
| |
| − | first_layer_speed = 15%
| |
| − | first_layer_temperature = 200
| |
| − | g0 = 0
| |
| − | gcode_arcs = 0
| |
| − | gcode_comments = 0
| |
| − | gcode_flavor = reprap
| |
| − | infill_acceleration = 50
| |
| − | infill_every_layers = 1
| |
| − | infill_extruder = 1
| |
| − | infill_extrusion_width = 120%
| |
| − | infill_speed = 60
| |
| − | layer_gcode =
| |
| − | layer_height = 0.3
| |
| − | max_fan_speed = 100
| |
| − | min_fan_speed = 35
| |
| − | min_print_speed = 5
| |
| − | notes = larsanconfig
| |
| − | nozzle_diameter = 0.35
| |
| − | only_retract_when_crossing_perimeters = 1
| |
| − | output_filename_format = [timestamp]_[input_filename_base].gcode
| |
| − | perimeter_acceleration = 25
| |
| − | perimeter_extruder = 1
| |
| − | perimeter_extrusion_width = 0
| |
| − | perimeter_speed = 60
| |
| − | perimeters = 2
| |
| − | post_process =
| |
| − | print_center = 120,120
| |
| − | randomize_start = 1
| |
| − | retract_before_travel = 4
| |
| − | retract_length = 2
| |
| − | retract_length_toolchange = 3
| |
| − | retract_lift = 0
| |
| − | retract_restart_extra = 0
| |
| − | retract_restart_extra_toolchange = 0
| |
| − | retract_speed = 50
| |
| − | rotate = 0
| |
| − | scale = 1
| |
| − | skirt_distance = 10
| |
| − | skirt_height = 1
| |
| − | skirts = 3
| |
| − | slowdown_below_layer_time = 50
| |
| − | small_perimeter_speed = 50%
| |
| − | solid_fill_pattern = rectilinear
| |
| − | solid_infill_below_area = 0
| |
| − | solid_infill_every_layers = 0
| |
| − | solid_infill_speed = 100%
| |
| − | solid_layers = 3
| |
| − | start_gcode = G28 ; home all axes\nM92 E820
| |
| − | support_material = 1
| |
| − | support_material_angle = 45
| |
| − | support_material_extruder = 1
| |
| − | support_material_extrusion_width = 160%
| |
| − | support_material_pattern = rectilinear
| |
| − | support_material_spacing = 2
| |
| − | support_material_threshold = 40
| |
| − | temperature = 205
| |
| − | threads = 2
| |
| − | top_solid_infill_speed = 40%
| |
| − | travel_speed = 90
| |
| − | use_relative_e_distances = 0
| |
| − | z_offset = 0
| |
| − | </pre>
| |
| − | | |
| − | == Gelbes Filament ==
| |
| − | * Ursprünglich für [[Reprap/Parent]] erstellt
| |
| − | * Damit gedruckt: der letzte gelbe frame-vertex für den Drucker
| |
| − | * etwas wärmer (195°C)
| |
| − | * 0.22 mm z-offeset
| |
| − | <pre style="height:200px;overflow:scroll;">
| |
| − | acceleration = 0
| |
| − | bed_size = 170,170
| |
| − | bed_temperature = 60
| |
| − | bridge_fan_speed = 100
| |
| − | bridge_flow_ratio = 1
| |
| − | bridge_speed = 30
| |
| − | brim_width = 0
| |
| − | complete_objects = 0
| |
| − | cooling = 1
| |
| − | disable_fan_first_layers = 1
| |
| − | duplicate = 1
| |
| − | duplicate_distance = 6
| |
| − | duplicate_grid = 1,1
| |
| − | end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
| |
| − | external_perimeter_speed = 90%
| |
| − | extra_perimeters = 1
| |
| − | extruder_clearance_height = 20
| |
| − | extruder_clearance_radius = 20
| |
| − | extrusion_axis = E
| |
| − | extrusion_multiplier = 1
| |
| − | extrusion_width = 0
| |
| − | fan_always_on = 0
| |
| − | fan_below_layer_time = 60
| |
| − | filament_diameter = 3
| |
| − | fill_angle = 45
| |
| − | fill_density = 0.15
| |
| − | fill_pattern = rectilinear
| |
| − | first_layer_bed_temperature = 60
| |
| − | first_layer_extrusion_width = 0
| |
| − | first_layer_height = 115%
| |
| − | first_layer_speed = 80%
| |
| − | first_layer_temperature = 200
| |
| − | g0 = 0
| |
| − | gcode_arcs = 0
| |
| − | gcode_comments = 0
| |
| − | gcode_flavor = reprap
| |
| − | infill_acceleration = 50
| |
| − | infill_every_layers = 1
| |
| − | infill_extruder = 1
| |
| − | infill_extrusion_width = 0
| |
| − | infill_speed = 40
| |
| − | layer_gcode =
| |
| − | layer_height = 0.28
| |
| − | max_fan_speed = 100
| |
| − | min_fan_speed = 35
| |
| − | min_print_speed = 10
| |
| − | notes = Used for Mate name tag
| |
| − | nozzle_diameter = 0.35
| |
| − | output_filename_format = [input_filename_base].gcode
| |
| − | perimeter_acceleration = 25
| |
| − | perimeter_speed = 30
| |
| − | perimeters = 3
| |
| − | perimeters_extruder = 1
| |
| − | perimeters_extrusion_width = 0
| |
| − | post_process =
| |
| − | print_center = 50,27
| |
| − | randomize_start = 1
| |
| − | retract_before_travel = 4
| |
| − | retract_length = 3
| |
| − | retract_lift = 0.4
| |
| − | retract_restart_extra = 0
| |
| − | retract_speed = 30
| |
| − | rotate = 0
| |
| − | scale = 1
| |
| − | skirt_distance = 6
| |
| − | skirt_height = 1
| |
| − | skirts = 3
| |
| − | slowdown_below_layer_time = 60
| |
| − | small_perimeter_speed = 30
| |
| − | solid_fill_pattern = rectilinear
| |
| − | solid_infill_speed = 40
| |
| − | solid_layers = 3
| |
| − | start_gcode = G28 ; home all axes\nM92 E820
| |
| − | support_material =
| |
| − | support_material_angle = 45
| |
| − | support_material_extruder = 1
| |
| − | support_material_extrusion_width = 0
| |
| − | support_material_pattern = rectilinear
| |
| − | support_material_spacing = 2.5
| |
| − | support_material_threshold = 45
| |
| − | temperature = 195
| |
| − | threads = 2
| |
| − | top_solid_infill_speed = 40
| |
| − | travel_speed = 130
| |
| − | use_relative_e_distances = 0
| |
| − | z_offset = 0.22
| |
| − | </pre>
| |
| − | | |
| − | [[Kategorie:RepRap]]
| |
